13
INSTALLATION INSTRUCTIONS
4
Locate the two holes on the rear of
the refrigerator (refer to
C
). Screw
in the M6 cap screws until all the
thread is gone.
5
Move the refrigerator back towards
the wall until the screw hits the back
of the bracket (refer to
D
).
Note: If you want your refrigerator
to sit further forward, unscrew up
to 10mm of the M6 cap screw. Be
careful that the screw does not miss
the bracket and contact the wall.
IMPORTANT!
When fastening with masonry plugs and/or screws:
●
●
Ensure the screws avoid electrical, gas and water conduits.
●
●
Ensure the surface of the bracket is fastened to withstand a 100kg load.
●
●
Ensure light-weight masonry material such as cinder block and new concrete (no
curing time) are not used in installation.
●
●
Do not use metallic materials that may corrode, stain and/or damage the enclosure.
C
45 – 60mm
D