4
INSTALLATION
CART ASSEMBLY INSTRUCTIONS
IMPORTANT:
Read all instructions before you begin. Do not jump ahead or skip any step.
CAUTION:
Some parts have sharp edges; care must be taken when handling the various components to
avoid injury. Please read safety information provided in these instructions before beginning
assembly. Wear gloves when handling.
Two or more people should work together to assemble the cart and All-Grill, Double Side Burner/
Sink, or Double Side Burner/Griddle.
NOTE: Avoid using side shelf to move cart. Push or pull cart by grasping corners of head.
GETTING STARTED
n
Remove packaging.
Contents Included:
Your cart is packaged in one box. The box contains your cart and a universal
hardware kit to be used for grill installation and may contain extra hardware for
your convenience.
Tools Required:
Contents
CAD1-30 CAD1-36 CAD1-48
13
16
17
2
2
4
2
2
2
4
4
4
2
2
2
Machined
Phillip screws
10-24X1/2”
Eye Goggles
Work Gloves
5/32” Allen Wrench
3/16” Allen Wrench
Power Screwdriver or
Variable Speed Drill
with Phillips - tip #2
Attachment
Contents
Model
Part No.
Qty.
22.5”
11-1/2”
X
19-3/4”
12-3/16”
X
19-3/4”
24.128”
26.6”
19.08”
2.497”
CAD1-30
71131
1
CAD1-36
71132
1
CAD1-48
71133
1
30” Cart shown
Bracket, Tab
3/32” Allen Wrench
Bolt Hex
1/4-20-1/2”
Washer
.313 x .750
Nut Hex
1/4-20
LOCATING THE CART
For proper use, this product should be installed/positioned on a flat ground or patio. Unevenness such as
bumps, cracks and protrusions should be 1/4” or less. Refer to Fig. 02 for required flat area dimensions.
CAD 36 = 914 mm
CAD 48 = 1219 mm
1219 mm
Fig. 02
TOP VIEW (with drawers open)
Table of quantity of parts
