Sportsman Uni-Arch Directions
Parts List
(13) 1/4 x 3” Bolts
(13) 1/4-20 Nuts
(4) Backing Plates
(8) O-Rings
Optional Parts
Additional Rod Holders
Radar Pad
Light Brackets
Special Notes
If you are going to run wires in your arch, it
is best to do as you assemble it.
Position of holes to wire are up to the
customer.
If you need to swap mounts “ deck or side”
send yours back along with $25 for
shipping and we will exchange.
Hand tighten all stainless hardware. If
you use power tools the bolts will lock
up. Use a lube on the top Center Bolts.
(2) Arch Sides
(2) Corner Braces
(2) Rear Leg Ext
(4) Elbows
(4) Mounts
(1) Center
Note: If you ordered a radar pad
Loctite Bolts that your are not going to
loosen.
