Assembly
Step 3
Insert Elbows into arch tops and
reinsert bolts with locktite.
Do not tighten bolts all the way
at this point
Make sure to have the elbows
going to the right on one arch side
and to the left on the other.
It does not matter what elbows
go with which arch side.
Step 2
Place 2 O-Rings on each elbow,
approx 2” and 8” from the end.
Slide the 2 arch sides into the center section. “Evenly”
Step 1
This is the point where you
should get your approx width close.
Wait to drill holes and install bolts,
until the arch is mounted on the boat.
Step 5
Install the brake away brackets and reinsert bolts.
Step 6
Instal the 2 corner braces. Do not
tighten these all he way up, until the
arch is fastened to the boat. You will
want to Loctite these bolts when
done with the instal
You will want to loctite these bolts when
you are done with the instal to you boat.
Step 4
Install the Rear Leg
extension. You will want
to loctite these bolts
when you are done with
the install.
