Mini Bots
ROBOTICS
5
ROBOTICS Module
Your ROBOTICS Mini Bots Construction Set contains the ROBOTICS
module. This corresponds to a small computer – not nearly
as powerful as a PC, but fully sufficient for the
following control experiments.
You cannot program the ROBOTICS module
your self. Various programs are already
permanently stored in the module. The program from the "teach-in
mobile robot" is an exception. This program allows you to create a short
motion program using the two buttons. The small slide switches allow
you to select and run the program for the model you want to control.
Power Supply
The ROBOTICS module works
only when it is connected to a
9 V power supply. For this pur-
pose use the battery tray with a 9 V block battery
either as dry cell or rechargeable battery. When
connecting ensure that the polarity is correct (red
= positive). When the module is suppled with
power correctly, the green LED illuminates.
Inputs I1 - I3:
Outputs Motor M1 and M2:
You can connect the fischertechnik
sensors to these inputs. They provide
information on the module. Two
buttons and one trail sensor are
available as sensors.
You can connect the XS motors to the
two outputs.
M1
M2
I1
I2
I3
Motor outputs
DIP switch
Inputs
Potentio
meter
Summary of Contents for ROBOTICS Mini Bots
Page 1: ......
