13
the machine from the machine. Secure the
contacts against short-circuiting (e.g. insulate
with adhesive tape).
Reducing dust exposure:
Warning!
Some dust created by power
sanding, sawing, grinding, drilling, and
other construction activities contains
chemicals known to cause cancer, birth
defects or other reproductive harm. Some
examples of these chemicals are:
→ Lead from lead-based paints,
→ Crystalline silica from bricks and cement
and other masonry products,
→ Arsenic and chromium from chemically
treated lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemicals: work in a well ventilated area, and
work with approved safety equipment, such as
those dust masks that are specially designed
to filter out microscopic particles.
This also applies to dust from other materials
such as some timber types (like oak or beech
dust), metals, asbestos. Other known diseases
are e.g. allergic reactions, respiratory diseases.
Do not let dust enter the body.
Observe the relevant guidelines and national
regulations for your material, staff, application
and place of application (e.g. occupational
health and safety regulations, disposal).
Collect the particles generated at the source,
avoid deposits in the surrounding area.
Use suitable accessories for special work. In
this way, fewer particles enter the environment
in an uncontrolled manner.
Use a suitable extraction unit.
Reduce dust exposure with the following
measures:
→ Do not direct the escaping particles and
the exhaust air stream at yourself or nearby
persons or on dust deposits.
→ Use an extraction unit and/or air purifiers.
→ Ensure good ventilation of the workplace
and keep clean using a vacuum cleaner.
Sweeping or blowing stirs up dust.
Vacuum or wash the protective clothing.
Do not blow, beat or brush.
5. Overview
Impact screwdrivers
1. Square attachment for 1/2“ tools
2. Rotation selector switch /
Transporting safety device
3. Trigger
4. LED light
For working on dimly lit areas.
The LED lights light up when the machine
is switched on.
5. Setting wheel for preselecting rotational
speed and tightening torque *
6. Battery pack
7. Battery pack release button
8. Belt hook *
Battery pack
9. Capacity indicator button
10. Capacity and signal indicator
See page 4.
* depending on the features / model
6. Initial Operation
Remove the battery pack from the machine
before any adjustment or maintenance is
carried out. Before fitting the battery pack,
make sure that the machine is switched off.
6.1 Battery pack
Charge the battery pack (6) before use.
If performance diminishes, recharge the
battery pack.
The ideal storage temperature is between
10 °C and 30 °C.
Li-Ion-Battery pack:
„Li-Power“ have a capacity and signal
indicator (10).
Press the button (9) the LEDs indicate the
charge level. The battery pack is almost flat
and must be recharged if one LED is flashing.
Removal:
Press the battery pack release (7)
button and pull the battery pack (6) forwards.
Inserting:
Slide in the battery pack (6) until it
engages.
EN
Summary of Contents for FSS 18 V 400 BL
Page 2: ......
