FISCHER Mess- und Regeltechnik GmbH
Installation and assembly | 3
BA_EN_EA16
9 / 88
3 Installation and assembly
The EA16 is designed for panel installation and is supplied fully assembled.
Please see the supplied electro-technology documents for the dimensional
drawings and information about the electrical connection of the panel. Panels
can always be supplied in the following mounting types.
Wall-mounting
Via a recess in the wall in the clean room. The minimum installation depth is 49
mm. The panel is attached with sunk-head screws.
Fig. 2:
Wall-mounting
Surface installation
Via surface-mounted housing on the wall of the clean room. The minimum in-
stallation depth is 52 mm. The panel is attached to the surface-mounted hous-
ing with sunk-head screws.
Fig. 3:
Surface installation
Channel assembly
Via a cut-out in the channel The minimum installation depth is 49 mm. The
panel is attached with sunk-head screws.
Fig. 4:
Channel installation
