Page 10
For technical questions, please call 1-888-866-5797.
Item 63298
Sa
FE
ty
Op
E
ra
ti
O
n
Maint
E
nanc
E
aSSEM
bl
y
Sa
FE
ty
Op
E
ra
ti
O
n
Maint
E
nanc
E
aSSEM
bl
y
Maintenance and Servicing
procedures not specifically explained in this manual must be performed only by a qualified technician.
tO prEVEnt SEriOUS inJUry FrOM acciDEntal OpEratiOn: Do not use damaged equipment.
if abnormal noise or vibration occurs, have the problem corrected before further use.
cleaning, Maintenance, and lubrication
1.
bEFOrE EacH USE,
inspect the general
condition of the Lift. Check for:
• broken, cracked, or bent parts
• loose or missing parts
• any other condition that may
affect its safe operation.
If a problem occurs, have the problem
corrected before further use.
Do not use damaged equipment.
2.
before each use, thoroughly test the lift
for proper operation prior to its actual use.
if the lift appears
not
to be working properly,
follow
Bleeding
instructions on page 9.
3.
change the hydraulic fluid at least
once every three years:
a. With the Lift fully lowered, remove the Fluid
Fill Plug on the side of the Ram housing.
b. With assistance, tip the Lift to allow the old
hydraulic fluid to drain out of the Ram housing
completely, and dispose of the old hydraulic
fluid in accordance with local regulations.
c. With the Lift upright, completely fill the
Ram housing with a high quality hydraulic
fluid (not included) until the fluid just
begins to run out of the Fluid Fill Hole.
d. Then reinstall the Fluid Fill Plug.
4. Clean with a clean cloth with a detergent
or mild solvent. Store the Lift in a safe,
dry location out of reach of children
.
