MMS
®
Inspection DPM High
21
Measurement
During the measurement you can also:
•
Delete the measured readings:
•
View the measurement curve for the measurands in a line chart:
6.3 Correctly holding the gage during the measurement
The display screen is to be under-
stood only as an example
•
Keep your hand in the area of the orange
gage housing at all times, this is marked
by the green rectangle in the figure to the
left. This prevents the housing grille from
being covered and the heat radiating from
your hand falsifying the measurement.
Further examples can be found on the next
page.
ATTENTION - Measurement error
Do
not
hold the lower black gage area in your
hand, this is marked by the red rectangle in the
figure to the left!
►
Keep the housing grille in the lower area
of the gage clear. Avoid covering with
hands, material or other objects.
►
Allow ambient air to flow unhindered
through the housing grille in the lower
area of the gage.
Batch 003
%RH
21.6
A
Ta
25.0
°C
Ts
30.0
°C
Td
2.7
°C
Ts-Td
27.3
°C
n = 5
Air and humidity
probes within the
housing grille
Summary of Contents for 606-032
Page 12: ...8 MMS Inspection DPM High Description ...
Page 39: ......
