Inverter Panda PMGi
Seite/Page 106 - Kaptitel/Chapter 11: Inverter Panda PMGi
14.7.16
11.5 Alternative front side/connection side PMGi 120 V/240 V -
representative picture
Fig. 11.5-1: Connection side
To connect the PMGi use the prepared cable and connect to
socket 4(PMGi in)
Connect your termination box with the socket 1. Do not cover
the air out grille (3)
1. Socket for Load (PMGi out)
2. PE/N bridge
3.Air out grille
4. Socket for generator connection (PMGi in)
5. FP- Bus socket connection to generator
6. Cooling water in (cold side) (Water cooled version only)
7. Cooling water out (hot side) (Water cooled version only)
11.5.1 Socket pins of the PMGi
Attention!
Connecting one Phase with the earth pin will destroy the
PMGi
11.5.1.1 PMGi AC out
Fig. 11.5-1: PMGi AC out
Single phase - PMGi AC out
Connect your AC terminal box here
representative picture
5
1
2
4
3
6
7
