Assembly instructions Rev6.0
9
This document is the property of Fischer Connectors.
This document must not be reproduced or distributed, in whole or in part, without prior written permission of Fischer Connectors.
Pin Layout front view.
Place the Support Washer “E”
around the termini ”D”.
Push the contact bloc (termini
“D” + insulator “C”) with the
Support Washer ”E” until it clips.
Position the O-Ring Seal “F” on
the Potting Set Body “G” then
slide the Potting Set Body “G”
into the Connector Body "B".
Be careful to the orientation of
the back body.
Receptacle
Plug
Click
