Assembly instructions Rev6.0
5
This document is the property of Fischer Connectors.
This document must not be reproduced or distributed, in whole or in part, without prior written permission of Fischer Connectors.
Pin Layout front view.
Place the Support Washer “E”
around the termini ”D”.
Push the contact bloc (termini
“D” + insulator “C”) with the
Support Washer ”E” until it clips.
Position the O-Ring Seal “F” on
the Clamp Set Body “G” then
slide the Clamp Set Body “G” into
the Connector Body "B".
Receptacle
Plug
Click
