Fischer Amps In Ear Amp 2 Manual Download Page 6

 

6

 
 

Specifications In Ear Amp 

 

Dimensions L x W x H: 

220 x 190 x 43 mm 

Weight: 2.4 

kg 

Operating Voltage: 

115VAC or 250 VAC 50/60 Hz, switchable 

Power consumtion 

18 watt max. 

Mains Connection: 

Euro-power connector 3-pole 

Frequency Response: 

20Hz to 50 kHz +/- 1 dB 

Power Headphone Amp: 

low level 

max. 250 mW, minimum impedance 8 ohms 

Power Headphone Amp: 

high level 

max. 250 mW, minimum impedance 40 ohms 

Limiter in Headphone Amp: 

yes  (cannot be disabled) 

Input Connectors: 

2 x combined XLR/jack, symm., 0 dB input level 

1 x Stereo Aux-Input jack, asymm. at front side, -10dB 

Outputs: 

2 x XLR Link out, 1 x Line Out Shaker-Amp, jack 

Headphone Outputs: 

1 x XLR male for Guitar In Ear Cable 

1 x 1/4“ stereo jack with adaptor 1/8“ 

 
 

 
 
 
 
 
 
 
 
 
 
 
 

WARRANTY:  

The manufacturer grants a warranty of 24 months from the date of purchase by the original owner for defects in 
materials or workmanship. When the appliance has been subject to misuse or has been altered, the warranty 
expires. When returning the defective unit, enclose the receipt, pack the unit to avoid transit damage, and return 
the unit carriage prepaid. The manufacturer does not accept carriage forward consignments.  

 
 
 
 
 
 
 
 
 
 
 
 

FISCHER AMPS 

HANS-ULRICH-BREYMANN-STR. 3, D–74706 OSTERBURKEN        

TEL: +49 (0) 62 91-648 79 0, FAX: 648 79 19 

E-MAIL: 

[email protected]

, Internet: 

www.fischer-amps.de

  

    

Summary of Contents for In Ear Amp 2









Reviews: