4
(12)
Switch
Add-on of the Aux input signal to the Shaker Line Out on the back
Aux-In to Shaker Out:
of the Amp. If a stereo signal is connected at the Aux-Input, a Mono Mix
signal (Post Volume control Aux-Input) is output automatically at the
Shaker Out. The inputs of channels 1 and 2 are output at the Shaker
Out and cannot be disabled (Post Gain control Channel 1 and 2).
(13)
Aux-Input
Input for an additional stereo or mono sound source (klick track, CD-/
Mp3 player, sampler...) which can be mixed to the main signal of
channel 1/2. The inputs are unbalanced. When a mono signal is looped
in only at the left output connector, the signal is internally at the left and
at the right side. When only the right input connector is occupied, the
signal can only be heard at the right side. When the Stereo/Mono switch
in the master section is adjusted to Mono Mix, the stereo signal at the
Aux Input is automatically added to mono.
Actuators and Connections Back Side
(1 / 2)
Combined XLR-
Jack Connections
Channel 1 (left), Channel 2 (right)
Connections of the input signal from the mixing console or other audio
sources. Assignment of the combined XLR connection:
XLR
stereo jack 1/4“
Pin 1 = Ground
sleeve
Pin 2 =
tip
Pin 3 = Signal –
ring
With asymmetric wiring with XLR cables, PIN 3 should be assigned to
ground (bridge in connection plug). Nominal input level 0dBu, adjustable
at front side from –15 dB to +15 dB, input impedance 10kohms.
(3 / 4)
Link Outputs
Channel 1 and 2
XLR outputs to loop input signals to more Amps.
Pin assignment: Pin 1 = Ground, Pin 2 = Signal (+), Pin 3 = Signal (-)
Please note: With asymmetric connection of inputs 1 and 2, the signal
at the Link Out connectors is unbalanced as well and will not be
balanced internally.
