SH2000
82.150 Rev 100315
32
7.4 Replacing Carrying Belts
7.4.1
Pull back tensioner(s) (A) and remove pressure wheel
drive belt(s) (B).
7.4.2
Remove the Belt Guards and slacken Nut (
C
) on the
Carrying Belt Tension Wheel.
7.4.3
Note the position of the long screw (
D
) and
slacken it about 5 turns.
7.4.4
Support the infeed end of the Front Bottom Plate
and remove the 3 other Bottom Plate fixing
screws.
7.4.5
Swing the Front Bottom Plate down and towards you
and remove the long screw (
D
).Replace the Carrying
Belt (
E
).
7.4.6
Refit the Front Bottom Plate by first fitting the long screw (
D
) in its original position.
Leave it loose
.
7.4.7
Swing the Front Bottom Plate in and up into position making sure that the Carrying
Belt is located correctly in the slot in the Mainframe, round the Drive Pulley and also
between the Pressure Springs and the Rear Carrying Belt.
7.4.8
Refit the 3 short fixing screws and tighten the long fixing screw. Tension the
Carrying Belt finger tight and retighten Nut (
C
). Refit the remaining parts and
assemblies in reverse order.
C
D
E
A
A
B
B
Note:
The long fixing screw (
D
) must always be fitted in the position below the
Gearbox and nearest to the centreline of the Bottom Plates.
7.4.9
The Rear Carrying Belt can only be replaced if the Front Bottom Plate has been
removed first.
7.4.10 Fit the Rear Carrying Belt in a similar way to the Front Carrying Belt.
MAINTENANCE
Summary of Contents for Saxon SH 2000
