9
1.5
Warranty conditions
The warranty period is 12 months from delivery. The warranty covers the entire laser
module. The warranty will become void on the
·
unauthorized opening of the unit‘s components
·
operation of the unit in an unauthorized confi guration
·
improper use, storage or transport (e.g. vibration, temperature shock, the
action of frost)
1.5.1 Limits of the warranty
No warranty of the suitability of the product for specifi c applications is provided.
FISBA is not liable for indirect, direct or consequential damages caused by the use of
this product.
2
Technical system
The laser module emits laser radiation with different wavelengths. Combination of
different laser diodes can emit radiation in the UV, VIS and/or NIR range. The correct
combination is documented within the data sheet, see page 14.
2.1
Laser module
Dimensions of the laser module in mm:
77
40
37
10
64
5
30
2.9
A
A
01
20
19
02
Pin assignment Samtec SFSD-10-28G24.00SR
01
VIN red N
11
RS485B
02
VIN red P
12
RS485A
03
VIN green N
13
GND
04
VIN green P
14
GND
05
VIN blue N
15
GND
06
VIN blue P
16
GND
07
GND
17
+12V...+24V
08
Enable red
18
+12V...+24V
09
Enable green
19
+12V...+24V
10
Enable blue
20
+12V...+24V
CAD-System: SolidWorks
00.237.83-010
SAP Material:
A4
Format
Format
www.fisba.com
1:1
Massstab / Scale
Werkstoff
Material
Änderungs-Nr.
Revision no.
Benennung / Description
1 / 1
Blatt / Anz
Sheet / no. of
Zeichnungs-Nr. / Drawing no.
Freigegeben
Approved
Erstellt
Prepared
READYBeam BIO
Streng vertraulich. Alle Rechte vorbehalten. Die Vervielfältigu
ng
und die Verarbeitung mit elektronischen Systemen ist ohne schriftliche Genehmigung der FISBA AG nicht gestattet.
Revision
Revision
+
E-18006
Gewicht
Weight
130.13 g
Geändert
Modified
Strictly confidential. All rights reserved. Reproduction and processing of data in electronic systems or in any form whateve
r
is not permitted without written authority of FISBA AG.
Status
Status
in Bearbeitung
Oberfläche
Surface
Dimension nach Oberflächenbehandlung
Dimensions after surface treatment
Kanten gebrochen 0.1...0.2x45°
Edges chamfered 0.1...0.2x45°
Allgemeintoleranzen nach ISO2768-fH
General tolerances according to ISO2768-fH
Toleranz-Grundsatz nach ISO8015
Tolerancing ISO8015
Alle Masse in mm
All dimensions in mm
Connector: Samtec SFSD-10-28G24.00SR
Pin assignment: documented in the appendix (Table 1 on page 12)
