Configure Register Settings
1. Access the Kineticpay application on the register
2. Tap Register Settings on the bottom right corner and test each section to verify.
a. Customer Facing Display
i. Select “Elo Paypoint”.
b. Scanner
i. Select “Elo Paypoint” if using internal barcode scanner or select your
matching model.
c. Cleartext Card Reader
i. Select “Elo Paypoint”
d. Payment Terminal
i. Select “Ingenico ICT220.”
ii. Tap the Address box next and enter the IP address recorded from the
Ingenico terminal.
iii. If the port on the Ingenico is different from the one showing “5020,”
enter a new port that matches the Ingenico terminal.
e. Enable Cash Drawer on Register Printer
i. Tap enable
f. Receipt Printers
i. Select “Elo Paypoint.”
3. Click save button on the top
9