12
Battery Back Up System
Your Perfect TV power lift chair comes with a battery back up system so the
chair can return to the seated position in the event of a household power failure.
A fresh set of standard 9V batteries have enough energy to bring the chair to a
seated position from either recline or lift.
The batteries do not have enough energy
nor are they intended to operate the chair for a prolonged period of time in the absence
of standard household voltage (120 volt, 60 Hz).
Batteries should be replaced
after a single use.
Batteries should be changed semi-annually (such as with
smoke alarm batteries). For your convenience, an initial set of batteries is
provided for your use. It is the user’s responsibility to ensure that fresh batteries
are used in the battery back up system. To help ensure the longest life of the
batteries, users are encouraged to not allow the remotes to become wedged in
between the seat cushions and the chair as this may activate the backlights on
the remote and create a slow drain of the batteries. (See installation page 7.)
Smart Tek™ (Power Indication)
Regular servicing is not necessary on your Perfect TV power
lift chair. Your power lift chair is equipped with an indicator
light on the hand control. This light illuminates green when any
button on the hand control is pressed indicating power to the
hand control.
Your power lift chair also comes with a power indicator light on the transformer
and on the power cord connecting the motor to the transformer. The lights
illuminate green constantly, indicating power from the outlet to the transformer
and the motor. The lights have been provided to help you identify electrical
disconnects, should they occur, and to help your dealer to diagnose electrical
problems, should they occur.
Should the chair not operate and the lights are out, check all electrical connections
to the chair. Make sure everything is plugged in properly and there is power to
the outlet into which the chair is plugged (see installation on page 7 for electrical
connections).
Should you ever encounter a problem with the operation of
your power lift chair and the lights are on, such as mechanical problems
or one light is out, discontinue all use of the product upon discovery of
the problem.
Contact the dealer from whom you purchased your chair. They will
be able to resolve problems and take care of proper factory service if needed. You
will need to be prepared to answer some basic questions about your power lift
chair, such as model and serial number. The model and serial number are located
on the hand control cord and the rear of the lift frame. Your dealer will ask you
questions about your power indicator lights, such as which one is out. Prior to
calling your dealer, check all the electrical connections to the chair. Make sure
everything is plugged in properly and there is power to the outlet into which the
chair is plugged (see installation on page 7 for electrical connections).
PA
TENTED
