Firstmark Controls 160001-01, Installation Manual

Page: 1 / 10

Installation Guide - Position Transducers
Providing the Ultimate Solutions in Precision
Displacement Sensors
Order
•
Site
Map
Home All Products Support Special Offers Contact Us
Home
Installation Guide - Position Transducers
Table of Contents
1. Introduction
2. 160001-01 Installation Kit
3. Before You Start
4. General
5. Analog-Output Position Transducers
6. Mounting
7. Wiring
8. Special Notes For Analog-Output Position Transducers Using Cam Lock-Mounted Potentiometers
9. Zero and Span Controls (Voltage Conditioner, 4-20 mA, Bridge Outputs)
10. Connecting The Displacement Cable
11. RoundAbout
™
Cable Guide
12. Tips And Troubleshooting
13. Certificates of Conformance
14. Repairs and Returns
15. Warranty
16. General Disclaimer
17. Limitations on the Use of Products
18. Record of Purchase
19. Additional Resources
1. Introduction
Thank you for purchasing a Firstmark Controls position transducer. Please read this Installation Guide before
operating your position transducer. By following the guidelines in this Installation Guide, you will be assured of a
simple setup and millions of accurate readings. If you have any questions or problems, please contact us (
reqcomm.htm ).
A list of Frequently Asked Questions (FAQs) is maintained at ptfaqs.htm .
2. 160001-01 Installation Kit
If you do not have a set of tools for mounting the position transducer and crimping the displacement cable, you may
want to purchase the 160001-01 installation kit (see below for contents).
http://www.firstmarkcontrols.com/s023a.htm (1 of 10) [8/12/2008 8:48:35 AM]
Search