Multi Sensor Solution
https://.install.myfirstech.com
DASII
Programming
Guide
Copyright 2021 Firstech, LLC DASII Programming
Page
5
OPTIONAL DAS2 Shock Sensitivity ONLY adjustment procedure (NON DC3 CM ONLY)
STEP 1:
Turn the ignition to the ‘on’ position.
STEP 2:
2 Way remotes-hold buttons 1 and 2 (Lock and Unlock) for 2.5 seconds. You will get two
parking light flashes. 1 Way remotes-hold Lock and Unlock for 2.5 seconds. You will get two
parking light flashes.
STEP 3:
To set the Warn Away Zone 1, (2way LCD) tap lock or button I. (1 Way) tap Lock. After
you get one parking light flash, proceed with impact testing on the vehicle.
Note: please be careful
as not to damage the vehicle during the sensitivity adjustments.
You will get siren chirps
1-most
sensitive (lightest impact to the vehicle requiring the least amount of force to trigger warn
away) through 10-least sensitive (heaviest impact to the vehicle requiring more force to trigger
warn away).
This sets the impact sensitivity of Warn Away Zone 1.
Setting Zone 1 will
automatically set Zone 2. If you would like to manually set Zone 2 proceed:
a.
To set Instant Trigger Zone 2, tap button 2. (1 Way: Unlock) After you get two
parking light flashes, tap the vehicle. You will get siren chirps 1-most sensitive
through 10-least sensitive. This sets the impact sensitivity of Instant Trigger Zone 2.
STEP 4:
Once you get two parking light flashes, you are ready to test your DAS.
OPTIONAL DASII Shock Sensitivity ONLY adjustment procedure (NON DC3 CM ONLY)
STEP 1:
Turn the ignition to the ‘on’ position
STEP 2:
Hold Foot Brake (make sure the CM sees a valid foot brake input)
STEP 3:
Tap Lock 3 times from any Firstech remote (including 1Button remotes)
STEP 4:
Release Foot Brake *Parking lights will flash 2 times confirming DAS is in programming
mode
STEP 5:
The CM will chirp/honk/flash (1-10 times) indicating the current sensitivity level
STEP 6:
Using any Firstech remote, OEM remote
(capable of Controlling the CM through data
module)
, or the Arm/Disarm analog
inputs
, tap lock or unlock 1 time to increase or decrease 1 level
of sensitivity (up to 10 (least sensitive) or down to 1 (most sensitive)) which should be confirmed by
chirps/horn honks/ flashes
*repeat this process until desired sensitivity level has been reached
a.
Example 1. Current sensitivity level is 4, we send 1 lock we should receive 1 chirp or 1
horn honk after 1 second of no incoming commands
Summary of Contents for DASII-2021
Page 1: ......
