background image

Manual De Instalación  

de Firstech LLC, Version: 1.0

 

Aplicable a los siguientes sistema de alarma: 

CM-230

5A

 – Modulo de Control 

de Alarma/Apertura 

Este dispositivo cumple con la Parte 15 de las normas de la FCC.

 funcionamiento está sujeto a las siguientes 

condiciones;  

(1) Este dispositivo no puede causar interferencias perjudiciales. 

(2) Este dispositivo puede aceptar cualquier interferencia recibida, incl

uidas las que puedan provocar un 

funcionamiento no deseado. 

PRECAUCIÓN: Los cambios 

o modificaciones que no hayan sido ex

presamente aprobados por la parte 

responsable del cum

plimiento 

pueden anular la autoridad del usuario 

par

a utilizar este dispositivo. 

techfeed.compustar.com 

Installation Manual 

By Firstech LLC, Version: 1.0

 

Applicable to the following alarm system: 

CM-230

5A

 – Alarm/Keyless Control Module 

This device complies with Part 15 of the FCC rules.

  Operation is subject to the following conditions; 

(1) This device may not cause harmful interference. 
(2) This device may accept any interference received, including interference that may cause undesired operation. 

CAUTION: 

Changes or modifications not expressly approved by the party responsible for compliance could void the 

user’s authority to operate this device. 

techfeed.compustar.com 

Summary of Contents for CM-2305A











Reviews: