Page 11
Page 12
Important!
When the vehicle shuts off after reservation mode, the
Compustar system will lock/arm the vehicle. Take care to not lock your keys
inside.
Important!
If you try to auto-start the vehicle when reservation mode
has not been set, the auto-start feature will not work.
When you press the auto-start button, the remote will beep three times.
The car parking lights will flash three times, pause, then flash seven times.
If you do not want to set reservation mode, shut off the engine before you exit the
vehicle. The engine will shut off for the following reasons:
You did not activate the parking brake or pressed the foot brake when you
turned the key to the off position.
You released the parking brake while the engine was running.
You entered Valet Mode after the Reservation Mode has been completed.
Canceling Reservation Mode
away from the vehicle by more than 50 to 100 ft,
and (3) 15 seconds have passed
since the last Auto Disarm
. Your system will disarm automatically if your remote
comes within a 50 to 100 ft radius from the vehicle.
Setting Auto Arming Function.
The range varies significantly depending on the radio signal environment.
Each time you press button
I
for 2 seconds :
First time : Auto icon is turned on.
Second time : Auto icon flashes - for longer range.
Third time
: Auto icon is turned off.
You can turn this function on or off by pressing button
[
I
]
for
2 seconds. When Auto arming is set, your security system will arm
automatically after (1) all the doors are closed, (2) your remote is
[
I
]
Auto Arming
While the vehicle is in valet mode, only the keyless entry function will be available.
Valet Mode is very useful when loaning your vehicle or having it serviced.
In order to enter Valet mode, press buttons
(I+III)
simultaneously for a 1/2 second.
In order to manually enter Valet Mode, insert your key into the ignition and turn
the ignition on, then off,
(between ACC and ON)
five times within 10 seconds.
Valet Mode
You can exit Valet Mode only by pressing buttons
(I+III)
simultaneously for a 1/2 second.
Safety Shut Down Features
The CompuStar 2W8000FMR, 2W8000FMR-2
nd
system has several shut down safety
features. The following actions will shut down the engine or prevent the car from
auto-starting : Opening the hood, pressing the brake, or if Valet Mode is turned on.
Turbo Mode
If this optional Turbo Mode has been programmed at the time of installation,
you can turn this feature on and off by pressing buttons
(III + IV)
for a 1/2 second.
In this mode, if the emergency brake has been set, the engine will continue to run
after the key has been taken out of the ignition. It will run until two minutes after the
emergency brake has been set.
• To utilize this mode, the emergency brake sensing wire has to be connected to the
emergency brake wire of the vehicle. Consult the authorized dealer for this mode.
• This option is ideal for turbo-charged vehicles because it allows the turbo too slowly
cool after operation.
(
2W8000FMR
)
2
nd
Car Mode
This Remote-Pager is able to operate a 2
nd
vehicle.
Press buttons
III & IV
simultaneously for 1/2 second. If this mode is turned to 2
nd
Car,
the Remote-Pager will not communicate with the 1
st
vehicle. To Exit 2
nd
Car press
buttons
III & IV
simultaneously again.
(
2W8000FMR-2
nd
)
