background image

12

13

OPERATION and CONTROLS

cont.

MENU SELECTIONS 

continued

2. DISC. LEVEL

Use 

and

increase or decrease DISCRIMINATION level.

Each time you press

, more types of metals are eliminated from detection.

Elimination occurs from left to right. When a category description (for example
“IRON”) disappears from the display, then all targets classified in that category
will not be detected.  
Pressing 

reverses the discrimination process. With each press of

, more types of metals will be include in detection.

Discrimination is a cumulative elimination system.  Targets can be eliminated
from left to right on the scale, with each additional press of 

, resulting in

more objects being eliminated from detection.

3. NOTCH

The category icon will remain illuminated until the number printed to the right
of the icon is reached. The number remaining illuminated in the middle of the
display is the lowest target value included in the detection. All lower value
targets are eliminated from detection

Use 

and 

to notch target categories IN or OUT while the NOTCH line

is highlighted.

Whereas the discrimination feature eliminates all categories sequentially from
detection, the NOTCH control allows you to selectively include or exclude
target categories from detection.

With each press of 

or 

, the notched category moves across the

display screen.  As you move the position of the notched category, you are
changing the detection status of the selected category.

• If a target category was previously eliminated (word not visible) then

notching that category will return it to detection. 

• If a target category was previously retained (word is visible) then

notching that category will remove it from detection. 

Only one target category at a time can be selected for notching.  To notch
multiple categories in or out, press

again while NOTCH is highlighted.

Each subsequent press of 

allows you to set an additional 

notch. Each time you press 

, followed by 

, the notch program will

begin by changing the status of the IRON segment.

At any time, the display screen indicates the current category notches or
discrimination settings.  Any category whose description is not visible will not
be detected.

For example, the following settings tell us that:

• The nickel, dime, and quarter categories will be detected.
• All other categories of targets (iron, foil, pulltab, s-cap+, and zinc) will not

be detected.

OPERATION and CONTROLS

cont.

MENU SELECTIONS 

continued

NOTCH 

continued

Summary of Contents for Gamma 6000

























Reviews: