First Office STAKS, Assembly Instructions Manual, Page: 44 / 50

STAKS Crossover Casegoods by FIRST OFFICE | 44
1. Position brackets (Item # PVPBKT-2) on bottom edge of privacy panel, usually
8" from edge of panel.
2. Assemble two halves of brackets with privacy panel between two halves.
3. Tighten screws to secure panel in place.
4. Hang completed assembly on top edge of spine wall panel, leaving 1" gap on either
side of privacy panel.
5. Panel and bracket locations may vary. Consult plan drawings.
6. Position brackets (Item # WPPBKT-1) on front and back edges of worksurface
where work stations are to be divided.
7. Tighten bolt on bottom of brackets to hold in place.
8. Assemble two halves of brackets with privacy panel between two halves.
9. Tighten screws to secure panel in place.
Privacy Panel Installation
SPINE WALL PRIVACY PANEL