First Office STAKS, Assembly Instructions Manual, Page: 33 / 50

STAKS Crossover Casegoods by FIRST OFFICE | 33
Worksurface Support Installation
CENTER SUPPORT
SQUARE METAL SUPPORT - ITEM #6-L2S
1. Position base 2" off edge of worksurface anywhere
extra support is needed.
2. Pilot bore holes on mounting plate and attach to
worksurface using (8) #12 x 1" Phillips pan head screws.
BACK PANEL SUPPORT - ITEM #6-2812SP
1. Place back panel support in center of span between
supports (pedestals, cantilevers, etc.).
2. Screw to back panel and worksurface using #10 x 5/8"
pan head screws (Hardware Kits - HK-10 & HK-11).
WALL PANEL SUPPORT - ITEM #6-2812WPS
1. Place wall panel support in center of span between
supports (pedestals, cantilevers, etc.).
2. Screw to wall panel and worksurface using #10 x 5/8"
pan head screws (Hardware Kit - HK-10 & HK-11).
T SUPPORT - ITEM #6-2812SB
1. Place T support in center of span.
2. Screw to wall panel and worksurface using #10 x 5/8"
pan head screws (Hardware Kit - HK-9).
2