First Degree Fitness Neptune Challenge, Owner'S Manual

Page: 4 / 15

4
Assembly Instructions:
Install Rower Seat onto Seat
Rail, with widest part of seat
rearward.
Step 1
Turn Seat Rail over, and install the Rear Rubber
Bumpstop using 2x M6x10mm screws with bev-
eled edge facing forward.
Step 2
CAUTION
Installing the Seat incorrectly will result in lack of
data pickup during rowing.
Step 3
Rear Rubber End Cap
Seat Rail Internal Support
Bracket
Rear Leg
Seat Rail
M10x25mm Bolt and
11x21x2 Washer
Using the M10x25mm Bolt, 11x21x2T
Washer, Seat Rail Internal Support
Bracket and Rear Leg, install as
shown. Once Rear Leg is tightened,
install the Rear Rubber End Cap.
M10 Nylock Nut and
11x21x2T Washer
M10x95mm
Bolt and
11x21x2T
Washer
Sensor Lead
Step 4: Install the Seat Rail onto the
Mainframe. Attach Sensor Lead from
Seat Rail to the Mainframe, then align
the front Seat Rail holes with Main-
frame and install, using 1x M10x85mm
Bolt, 2x 11x21x2T Washers and 1xM10
Nylock Nut.