7
The runner assembly can now be lifted away from the inner side of the machine, Fig 3.
Fig.4 shows the inside of the machine with the runner assembly removed.
The water tray used in the humidified holding cabinets consists of a tray with a cover plate.
Fig. 3
Fig. 4
The cover plate has 3 holes punched in it to promote water evaporation. See Fig. 5.
For normal operation the factory setting of the holder is 75
C
Temperature / Humidity characteristics
If the temperature of the holder is raised then the characteristics of the unit will change too.
Typically the humidity will be affected by changes to the temperature.
If the temperature is altered then experimentation will be required to see what water levels
(if any are required).
Summary of Contents for VIZU VI014HHC
Page 11: ...10 Wiring Diagram ...
