IS 582 ECN 3851
Page 10 of 17
CLEANING
Do not use a water jet or steam cleaner, and do not immerse this appliance.
Always disconnect the appliance from the mains supply before cleaning or
maintenance.
Clean all panels with warm water and mild detergent do not use abrasive materials.
Dry with a soft cloth.
If the appliance is not to be used for a lengthy period, disconnect from the mains
supply and clean well.
SERVICING, MAINTENANCE AND
COMPONENT REPLACEMENT
All servicing, maintenance and component replacement on this appliance should be
carried out by one of our recommended service engineers.
Disconnect the appliance from the electricity and turn of the gas before greasing the
lifting mechanism screw thread. It is recommended that the lifting mechanism is
greased at least every six months. (Rocol Foodlube Universal 2) This is accessed by
removing the front control panel. The lid springs should be done at the same time.
These are accessed by removing the cover located at each end by screws
Do not use a water jet or steam cleaner, and do not immerse this appliance.
Always disconnect the appliance from the mains supply before cleaning or
maintenance.
Steel parts can be cleaned using a cloth with water and mild detergent – aggressive
or abrasive cleaning substances such as steel wool or chlorine based products must
be avoided.
Do not use sharp objects during cleaning.
If the appliance is not to be used for a lengthy period, disconnect from the mains
supply and clean well.
Replacing components with spares
IMPORTANT:
Before making any repairs disconnect the appliance from the gas
supply, the water supply and the electrical supply. Do not touch the sealed
regulation screws, situated on the gas valve. After any servicing, make sure to check
the integrity of the appliance, checking for gas soundness.
Ignition electrodes
Raise tank and remove igniter bracket
