Step 5. Plug the battery charging power cord into the jack
socket on the battery charger.
Step 6. Connect the battery charger power plug into an electrical
outlet (AC115-230V, 50 to 60 Hz) and charge the battery. (Note:
There is no switch on the battery charger)
LED information at battery charger during Charging:
1.Green-No-load standby, ready for charging; or fully charged
2.Orange-Charging
3.
Orange LED flickering- low battery voltage, discharged
already, battery damaged.
4.
Red LED flickering- abnormal situation (over voltage, over
current, short circuit/reverse connection protection) if not the
battery is under voltage, then the battery is abnormal.
9.3
AFTER CHARGING
(1.) Remove the battery charger plug from the electric outlet.
(2.) Remove the battery charger jack plug from the scooter jack
socket.
9.4
ERROR CODE
If the LED light on the middle of the dashboard keeps
flashing periodically, please contact your approved service
provider.
