Page 4
Page 5
Installing camera
Mounting Camera and Running Cable
Select the position for the camera and secure the camera stand. Screw the camera onto the stand. Adjust
camera to the proper view angle. Make sure the lens is upright relative to the subject. Tighten the thumb
bolt. First Alert cameras can be either ceiling or wall mounted by simply changing the camera stand
mounting. See “Camera Orientation” Info box. Holes are provided on both the bottom and back of the
camera housing to accommodate most mounting requirements. Run cable from camera to DVR location.
See Information box below on “Longer Cable Runs”.
Camera Orientation
It’s important the camera is mount-
ed correctly to ensure the image is
not upside down as the camera lens
can only be positioned one way.
Longer Cable Runs
Longer cable runs may require an upgrade to RG59
Coax cable. First Alert kits ship with economical AV
cable that is designed to work well up to the length of
cable provided, usually around 60 feet. If longer dis-
tances between camera and DVR are required, you will need to upgrade
to RG59 Coax cable. We provide several lengths up to 300 feet. In ad-
dition, if you need to run cable for in-wall installations, then you may
require fire rated cable, FT-4/CMR UL approved for in-wall installations.
Camera - Wall Mounted
Camera - Ceiling
Mounted
safety
caution statements
safety precautions
•
Do not drop, puncture, or disassemble the camera.
•
Do not tug on the power adapter. Use the plug to remove it from the wall.
•
Do not expose the camera to high temperatures.
•
For your own safety, avoid using the camera when there is a storm or lightning in your area.
•
Use the camera with care. Avoid pressing hard on the camera body.
•
Do not crush or damage the power cable
FCC Compliance Class B Digital Device
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that the interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that of the receiver.
•
Consult the dealer or an experienced radio or TV technician for help.
Notice: Only peripherals complying with FCC class B limits may be attached to this equipment. Operation
with non-compliant peripherals or peripherals not recommended by First Alert / BRK Brands, Inc. is likely
to result in interference to radio and TV reception. Changes or modifications to the product, not expressly
approved by First Alert / BRK Brands, Inc., could void the user’s authority to operate the equipment.
We, First Alert / BRK Brands, Inc. declare under our sole responsibility that the device to which this
declaration relates: Complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FCC Certification (if applicable)
This device contains a radio transmitter. Accordingly, it has been certified as compliant with 47 CFR Part
15 of the FCC Rules for intentional radiators. Products that contain a radio transmitter are labeled with an
FCC ID.
fcc compliance
Connecting Camera
Video to DVR
Video In
Video to Camera
Power to Camera
Power to DVR
DC 12V Input
Power to Camera
Power
from 120V
12V DC Converter
From DVR
AV Cable: BNC/
DC Power
Follow this diagram to connect camera to a DVR or other device using a BNC connection. Note: DVR
Power Adaptor is for illustration purposes only. Your power adaptor may be different.
Option 1
Power from DVR
(Not Supplied)
Option 2
Power from
Supplied Adaptor
Splitter from DVR
Camera & Power
Supplied 12V DC Adaptor
product overview
Installation
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO
NOT OPEN CAMERA. NO SERVICABLE PARTS INSIDE. FAILURE
TO DO SO CAN RESULT IN DAMAGE TO THE CAMERA OR ITS
COMPONENTS AS WELL AS INJURY OR DEATH.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of un-insulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle, is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
CAUTION
RISK OF ELECTRIC SHOCK
fire and electric shock hazard statement
