4
3
4
3
OPENING SAFE FOR THE FIRST TIME
EXTENDING BOLTS BEFORE VERIFYING COMBINATION
VERIFYING THE COMBINATION
The combination lock on your safe has been set randomly at the factory. After
completely dialing the combination provided with your safe, turn the safe handle
clockwise and open the door. With the door open it is recommended that you
verify the combination opens a few times before using the safe. It is also strongly
recommended that you do this after moving the safe.
It is preferred to verify your safe combination with the door open. If there are
problems, it is easier to service the lock or mechanism with the door open.
Before verifying your combination, you will need to extend the door bolts while
the door is open. Keep the door open. You can now verify your combination.
IMPORTANT
DIAGRAM EXTERIOR
1
3
INTERIOR CONFIGURATION, LOCKING BOLTS AND BOLT WORK MAY VARY ON SOME MODELS
Top Shelf
Safe Interior Walls
Gun Rack
Side Shelf (3)
Divider (1)
Bolt Down Hole Cap (4)
Locking Bolts (7)
Model No. Label,
Serial Number Label
SIZE OF SAFE, GRAPHICS AND COLOR MAY VARY ON SOME MODELS
Safe Body
Lock
Internal Hinges
Safe Door
Handle Single Lever
Power Cord Access Hole
Serial Number Label
(Bottom, front right corner)
DIAGRAM INTERIOR
Rubber seal
