manualshive.com logo in svg

Firmtech FB900AS, User Manual, Page: 22 / 30

Share
Download
Firmtech FB900AS User Manual Download Page 22

                                                     

22

Contact: Firmtech.Co,LTD  www.firmtech.co.kr  [email protected] 

T. +82.31.719.4812   F. +82.31.719.4834      FB900AS User Manual ver1.0D 

[6.2] MODE3 

User may set the target BD address at the remote site.   

 

  [7] REMOTE CONTROL ID 

NO 

Menu 

Default Value 

8 

Remote Control ID 

admin 

 

[7-1] This is the login ID to access to FB900AS at the remote site. 

[7-2] User can change this within 12 characters. 

 

[8] REMOTE CONTROL PW 

NO 

Menu 

Default Value 

9 

Remote Control PW 

BTWIN 

 

[8-1] This is the password to access to FB900AS at the remote site. 

[8-2] User can change this within 12 characters.

 

 

[9] Operation Mode 

NO 

Menu 

Default Value 

0 

Operation Mode 

MODE1 

 

[9-1] User can set the operation mode with this menu.   

[9-2] User can not use PIN 1 (the operation switch) when the remote control is enable. 

User only can set the operation mode on PC configuration mode.   

[9-3] Remote control is used at operation mode1. 

 

 

 
 
 
 
 
 
 
 

Summary of Contents for FB900AS































Reviews:

No comments