manualshive.com logo in svg

Firmtech FB900AS, User Manual, Page: 21 / 30

Share
Download
Firmtech FB900AS User Manual Download Page 21

                                                     

21

Contact: Firmtech.Co,LTD  www.firmtech.co.kr  [email protected] 

T. +82.31.719.4812   F. +82.31.719.4834      FB900AS User Manual ver1.0D 

[5] Flow Control 

NO 

Menu 

Default Value 

6 Flow 

Control 

OFF 

 

[5-1] It is bypass the flow control signal. 

This menu has to be ON when make the link chain on Operation mode1.   

 

 

7.4 Configuration Menu (Remote Control is On) 

 

 

 

User can not use pin1 and 2 of DIP switch when the remote control is enable.   

Instead of that, User can set the operation mode and connection mode on PC configuration 

mode. 

[6] CONNECTION MODE 

NO 

Menu 

Default Value 

7 Connection 

Mode 

Mode1 

 

Set the connection mode. 

[6.1] MODE1 

Whenever FB900AS try to connect with the latest paired bluetooth devices. 

If TARGET BD ADDRESS is “000000000000”, it search the bluetooth device has same pin code. 

After searching, it will try to connect with that automatically.   

 

Summary of Contents for FB900AS































Reviews:

No comments