Firman W01785 Operator'S Manual Download Page 39

37

CALIFORNIA AND FEDERAL 

EXHAUST AND EVAPORATIVE EMISSIONS CONTROL WARRANTY STATEMENT

YOUR WARRANTY RIGHTS AND OBLIGATIONS

FIRMAN POWER EQUIPMENT INC.

Emission Control System Warranty

The warranty period begins on the date the engine/equipment is delivered to an ultimate purchaser. FIRMAN warrants to the ultimate 
purchaser and each subsequent purchaser that the engine is:

Designed, built, and equipped so as to conform with all applicable regulations adopted by the Air Resources Board and US EPA; 
and Free from defects in materials and workmanship that cause the failure of a warranted part to be identical in all material 
respects to the part as described in the engine manufacturers application for certification.

The warranty on emissions-related parts is as follows:

(1) Any warranted part that is not scheduled for replacement as required maintenance in the owner's manual supplied, is 
warranted for the warranty period stated above. If any such part fails during the period of warranty coverage, the part will be 
repaired or replaced by  FIRMAN at no charge to the owner. Any such part repaired or replaced under the warranty will be 
warranted for the remaining warranty period.
(2) Any warranted part that is scheduled only for regular inspection in the owner's manual supplied, is warranted for the warranty 
period stated above. Any such part repaired or replaced under warranty will be warranted for the remaining warranty period.
(3) Any warranted part that is scheduled for replacement as required maintenance in the owner's manual supplied, is warranted 
for the period of time prior to the first scheduled replacement point for that part. If the part fails prior to the first scheduled 
replacement, the part will be repaired or replaced by  FIRMAN at no charge to the owner. Any such part repaired or replaced 
under warranty will be warranted for the remainder of the period prior to the first scheduled replacement point for the part.
(4) Repair or replacement of any warranted part under the warranty must be performed at no charge to the owner at a warranty 
station.
(5) Notwithstanding the provisions of Subsection (4) above, warranty services or repairs must be provided by  FIRMAN that 
are franchised to service the subject engines.
(6) The owner must not be charged for diagnostic labor that leads to the determination that a warranted part is in fact defective, 
provided that such diagnostic work is performed at a warranty station.
(7)  FIRMAN is liable for damages to other engine components proximately caused by a failure under warranty of any 
warranted part.

MANUFACTURER'S WARRANTY COVERAGE:

The exhaust and evaporative emissions control system on your 

 is warranted 

for two years.  If any emissions-related part on your small off-road engine and engine powered equipment  is defective, the part will 
be repaired or replaced by FIRMAN.

small off-road engine and engine powered equipment 

The  California  Air  Resources  Board,  US  Environmental  Protection  Agency  (“US  EPA”)  and  FIRMAN  POWER  EQUIPMENT 
INC.(FIRMAN)  are  pleased  to  explain  the  emissions  control  systems  warranty  on  your  2021-2022  or  later  Small  Off-Road 
Engine  (“SORE”)  and  engine  powered  equipment.  In  California,  new  equipment  that  use  small  off-road  engines  must  be 
designed,  built  and  equipped  to  meet  the  State’s  stringent  anti-smog  standards.  FIRMAN  must  warrant  the  emissions  control 
systems  on  your  SORE  and  engine  powered  equipment  for  the  periods  of  time  listed  below  provided  there  has  been  no  abuse, 
neglect or improper maintenance of your small off-road engine or equipment leading to the failure of the emissions control system.
Your emissions control system may include parts such as the carburetor or fuel-injection system, the ignition system, catalytic 
converter, fuel tanks, fuel lines (for liquid fuel and fuel vapors), fuel caps, valves, canisters, filters, clamps and other associated 
components.  Also included may be hoses, belts, connectors, and other emission-related assemblies.

Where a warrantable condition exists, FIRMAN will repair your SORE and engine powered equipment at no cost to you 
including diagnosis, parts and labor.

OWNER'S WARRANTY RESPONSIBILITIES:

As the 

 owner, you are responsible for the performance of the required maintenance 

listed in your owner's manual.  FIRMAN recommends that you retain all receipts covering maintenance on your SORE and 
engine powered equipment, but FIRMAN cannot deny warranty coverage solely for the lack of receipts or for your failure to 
ensure the performance of all scheduled maintenance.

SORE and engine powered equipment

As the 

 owner, you should however be aware that FIRMAN may deny you warranty 

coverage if your small off-road engine or engine powered equipment or a part has failed due to abuse, neglect, or improper 
maintenance or unapproved modifications.

SORE and engine powered equipment

You are responsible for presenting your 

 to a FIRMAN distribution center 

or service center as soon as the problem exists.  The warranty repairs shall be completed in a reasonable amount of time, 
not to exceed 30 days.

small off-road engine and engine powered equipment

If you have any questions regarding your warranty rights and responsibilities, you should contact FIRMAN  at 1-844-347-6261. 

FIRMAN Emission Control Defects Warranty  Provisions

English                                                                                                                                                  Customer Service: 1-844-FIRMAN1

Summary of Contents for W01785










































Reviews: