Firman W01785, Operator'S Manual, Page: 11 / 41

09
FEATURES AND CONTROLS
Control Panel
6. Output Ready Indicator Light – Remains “ON” during normal operating conditions. Shuts “OFF”
when generator is overloaded. The green AC Power Indicator Light comes on when the engine
starts and generates power.
7
.
Overload Indicator Light – This light turns “ON” when the generator is overloaded and will cut
power to the receptacles. If the engine overload indicator light comes on, the generator’s wattage /
amperage capacity has been exceeded by connected electrical devices. When this occurs, the
green AC Power Indicator Light(Item 6) will go off. The engine will continue to run, but the red
Engine Overload Indicator Light will stay on and power will no longer be supplied to connected
electronic devices.
1
3
2
4
5
6
10
11
12
13
14
7
8
9
15
16
NOTICE Total power drawn from all receptacles must not exceed the data decal rating.
5. 120V, 20A - NEMA 5-20R (Not GFCI protected)
A maximum of 14.2 Amps current may be drawn from this duplex receptacle.
2. 120V, 30A Receptacle – NEMA L5-30R
A maximum of 14.2 Amps current may be drawn from this receptacle.
8. Oil Warning Indicator Light – Check oil level when this light turns “ON”. Engine will not run when
indicator is lit. When the oil falls below the minimum level, the oil warning indicator light comes
on and the engine stops automatically. The engine will not start until the proper amount of oil is
in the crank case.
4. Parallel Operation Outlets - These outlets are used for connecting two FIRMAN inverter
generators for parallel operation. A FIRMAN parallel kit(optional equipment) is required for
parallel operation.
1. Ground Terminal – Consult an electrician or authority having jurisdiction for local grounding
requirements.
9. Choke Knob – Used to start a cold engine.
3. Outlet Cover - Protect the receptacles from dust and debris.
English Customer Service: 1-844-FIRMAN1