1
2
2
4-1 Data-Minder(Multi-Meter)
– Push the
SELECT button to show the Voltage, Hertz and
running hours. If the low oil indicator is lit,
check the oil level.
3
4
5
7
120V, 30A RV
(NEMA TT-30R)
Battery Power Restore Switch
– Restore the
battery power to the control module.
You must
press this switch and hold for 3 seconds before
start the generator, including recoil,
electric and remote start.
9
Outlet Cover -
Protect
the
receptacles from
dust and debris.
10
11
Page 11
NOTE:
Total power drawn from all receptacles must not exceed the name plate rating.
Engine Start Switch
– Used to start engine
from the starter motor(Electric start model
only). To start engine, press and hold the
switch in the “
START
”(
ll
) position, the
engine will crank and attempt to start. When
the engine starts, release the switch to the
“
RUN
”(
l
) position.
1
Control Panel
A - Digital display
B - AC voltage indicator
C - Frequency indicator
D - Hour indicator
E - Low oil indicator
F - Select button
English Customer Service: 1-844-FIRMAN1
Maximum full load 30 Amp current may be
drawn from this 120 Volt receptacle.
8
3
4
5
6
7
8
9
10
11
12
12
12
13
14
15
240V
120V
DC Circuit Breaker-
Protect the DC receptacle.
12V DC Outlet Receptacle-
Maximum full load
8.3 Amp current may be drawn from this 12 Volt
receptacle.
120/240V, 30A Twist-Lock
– (NEMA L14-
30R) May be used to supply power for the
operation of 120/240 Volt, 30Amp.
6
7
120V, 20A Duplex
(
NEMA 5-20R)
LED Light
Maximum full load 20 Amp current may be
drawn from this 120 Volt receptacle.
14
Voltage Selector Switch
– To select
between 120 Volt or 240 Volt.
12
13
Ground Terminal
– Consult an electrician
for local grounding regulations.
16
Two 3.1Amp-5.0 Volt DC USB Ports
15
17
