1
2
3
4 5
6
7
8
9
10
11
2
4-1 Data-Minder(Multi-Meter)
– Push the
SELECT button to show the Voltage, Hertz and
running hours. If the low oil indicator is lit,
check the oil level.
3
4
5
7
Ground Terminal
– Consult an electrician
for local grounding regulations.
120V, 20A Duplex
– (NEMA 5-20R) 20 Amp
of current may be drawn from this 120 Volt
receptacle.
6
120V, 30A RV
(NEMA TT-30R)
Battery Switch
– Power the electric starter.
9
Outlet Cover -
Protect
the
receptacles from
dust and debris.
10
11
Page 11
NOTE:
Total power drawn from all receptacles must not exceed the name plate rating.
Engine Start Switch
– Used to start engine
from the starter motor(Electric start model
only). To start engine, press and hold the
switch in the “
START
”(
ll
) position, the
engine will crank and attempt to start. When
the engine starts, release the switch to the
“
RUN
”(
l
) position.
1
Control Panel
A - Digital display
B - AC voltage indicator
C - Frequency indicator
D - Hour indicator
E - Low oil indicator
F - Select button
Maximum full load 30 Amp current may be
drawn from this 120 Volt receptacle.
8
240V
120V
11
12
120/240V, 30A Twist-Lock
– (NEMA L14-
30R) May be used to supply power for the
operation of 120/240 Volt, 30Amp.
Voltage Selector Switch
– To select
between 120 Volt or 240 Volt.
12