Firman P03602 Owner'S Manual Download Page 3

Thank you for purchasing a  FIRMAN  generator.

This  manual  covers  operation  and  maintenance  of  the  FIRMAN  generators.  All  information  in  this 
publication is based on the latest production information available at the time of approval for printing.
The  manufacture  reserves  the  right  to  change,  alter  or  other  wise  improve  the  generator  and  this 
documentation at any time without prior change.

Page 02

This manual contains

 safety information to make you aware of the hazards and risks associated 

with generator products and how to avoid them. This generator is designed and intended only 
for supplying electrical power for operating compatible electrical lighting, appliances, tools and 
motor  loads,  and  is  not  intended  for  any  other  purpose.  It  is  important  that  you  read  and 
understand these instructions thoroughly before attempting to start or operate this equipment. 

Save these original instructions for future reference.

Important Safety Information

The manufacturer cannot possibly anticipate every possible circumstance that might involve a 
hazard. The warnings in this manual and the tags and decals affixed to the unit are therefore not 
all-inclusive. If you use a procedure, work method or operating technique that the manufacturer 
does not specifically recommend you must satisfy yourself that it is safe for you and others. You 
must also make sure that the procedure work method or operating technique that you choose 
does not render the generator unsafe.

SAFETY INFORMATION

DANGER

WARNING

CAUTION

DANGER indicates a 

potentially hazardous 

situation which, if not 

avoided. WILL result in 

death or serious injury.

WARNING indicates a 

potentially hazardous 

situation which, if not 

avoided, could result in 

death or serious injury.

CAUTION indicates a 

potentially hazardous 

situation which, if not 

avoided, may result in minor 

or moderate personal injury, 

or property damage.

Toxic Fumes

Fire Hazard

Hot Surface.
Do Not Touch the Surface.

Kickback

Risk of Electric Shock

Explosion Hazard

Rotating Parts Entanglement 
Hazard

Operator’s Manual

Summary of Contents for P03602

































Reviews: