MCR Parameter Modification
This option is for users who need to customize the MCR parameters for a particular task.
The MCR parameters can be modified by using the supplied utility program.
The utility can be found on the DVD that came with your system in the “\Utilities\USB
MSR\Software” folder. The program name is HID_MSR_PSW00003.exe.
And the utility user manual can be found in “\Utilities\USB MSR\Documents\
HidMsrUserManual_TM970001.pdf.”
VFD Customer Display Installation
1. Turn off system power.
2. Important, make sure that the jumpers on the I/O board are set correctly. It's
important to note that the supply voltage for the VFD customer display is set to
+12V. If an LCD customer display is chosen, please change it to +5V.
3. Please refer to jumper setting in the 4
th
chapter.
4. Attach the VFD
Mounting stand to
the terminal and
lock with one
screw
5. Connect the VFD
RJ45 cable to
COM4 on the I/O
board
6. Turn on VFD
power switch and
turn on system
power.
Note: If the VFD does not display correctly after an application is loaded, please refer to troubleshooting.
COM5COM3
