AerPOS Series AP-3615
32
FEC-AUO Capacitive Touch Calibration
This Capacitive Touch has auto calibration controller via USB interface. There are two different
methods which can initiate the touch auto calibration: (1) Reboot the Terminal. (2) Switch Off the
Display Module then Switch On Again
**Note** Capacitive touch screen will not operate with either a gloved hand or with a mechanical stylus. It is
made of glass, which makes it extremely durable and scratch resistant. Capacitive touch might need the
calibration when too many water or liquid stays on the glass during touch operation or the humidity goes too
high to meet 80%~90%. Thus, FEC recommends users to keep the liquid from the touch glass and
calibrate the touch screen.
FEC-AUO Capacitive Touch Utility
This section explains the different folders of FEC AUO Capacitive Touch Utility.
Three Utilities include:
COM-Driver Utility
Delay Time Tool
Update Firmware Tool
**Note**
“com-Driver” and “update firmware tool” relate to touch controller main firm and major functionality.
“Delay Time Tool” relates to Multi Click (multi Click) improvement. These three utilities are for
engineering and maintenance purposes. If there is any question, please contact FEC
’s FAE for
further assistance.
Summary of Contents for AerPOS AP-3615
