Page | 10
Firgelli Automations
Email:
1-866-226-0465 Ext. 2
After completing the RESET and STUDY processes, the following functions are achievable:
REMOTE CONTROLLER:
Press
:
Sustaining Mode:
press button once and the lift will extend continuously up; press any button to stop it
or it will stop automatically at the set upper limit spot.
Momentary Mode:
press and hold button to raise the lift, release button and the lift stops moving.
Press
:
Sustaining Mode:
press button once and the lift will retract continuously down; press any button to
stop it or it will automatically stop at the set lower limit spot.
Momentary Mode:
press and hold button to lower lift, release button to stop;
COM Button:
Use the COM button to switch between sustaining and momentary modes.
Hold COM button 10 seconds to switch from momentary to sustaining mode and vice versa
When the switch is conducted successfully, the red light will be on and the remote controller will
flash to signal that the change has been saved.
•
The setting will be remembered for future remote use.
