15
© 2020 Carrier
4.
SELECT THE APPROPRIATE RETRACTOR ASSEMBLY
PART NUMBER
DESCRIPTION
SF1-RET-1
Retractor Assembly, 6” Stroke, 110 vac solenoid.
SF1-RET-2
Retractor Assembly, 6” Stroke, 220 vac solenoid.
SF1-RET-3
Retractor Assembly, 9” Stroke, 110 vac solenoid.
SF1-RET-4
Retractor Assembly, 9” Stroke, 220 vac solenoid.
SF1-RET-5
Retractor Assembly, 12” Stroke, 110 vac solenoid.
SF1-RET-6
Retractor Assembly, 12” Stroke, 220 vac solenoid.
5.
SELECT THE APPROPRIATE RETRACTION MOUNTING TUBE
The Retraction Mounting Tube part number will start with “MT1R”, followed by three digits. These
three digits specify the Retraction Mounting Tube length (in inches), available in two inch incre-
ments from 28” (028) to 170” (170).
Important Note: You must specify a Retraction Mounting Tube that is at least 10” shorter than
the HESI Spark Rod specified in step 3 (above).
MT1R – XXX
Retraction Mounting Tube
Length in inches
(028 through 170)
in 2” increments
EXAMPLE:
Specify a Retraction Mounting Tube for a 72 inch long SureFire HESI Spark Rod (P/N SFR-
072). Specify part number:
MT1R – 062
