background image

 

 

 

8

 

 

 

 

 

 
 
 
 
 
 
 
 
NOTICE 

When Fireye products are combined with equipment manufactured by others and/or integrated 
into systems designed or manufactured by others, the Fireye warranty, as stated it its General 
Terms  and  Conditions  of  Sale,  pertains  only  to  the  Fireye  products  and  not  to  any  other 
equipment or to the combined system or its overall performance. 
 
 

WARRANTIES

 

FIREYE  guarantees  for 

one year from the date of installation or 18 months from date of 

manufacture 

of  its  products  to  replace,  or,  at  its  option,  to  repair  any  product  or  part  thereof 

(except  lamps,  electronic  tubes  and  photocells)  which  is  found  defective  in  material  or 
workmanship or which otherwise fails to conform to the description of the product on the face of 
its  sales  order. 

THE  FOREGOING  IS  IN  LIEU  OF  ALL  OTHER  WARRANTIES  AND 

FIREYE  MAKES  NO  WARRANTY  OF  MERCHANTABILITY  OR  ANY  OTHER 
WARRANTY, EXPRESS OR IMPLIED. 

Except as specifically stated in these general terms 

and conditions of sale, remedies with respect to any product or part number manufactured or sold 
by Fireye shall be limited exclusively to the right to replacement or repair as above provided. In 
no event shall Fireye be liable for consequential or special damages of any nature that may arise 
in connection with such product or part. 

 

WARNING: THE INAPPROPRIATE SELECTION OR APPLICATION OF A SYSTEM 
SETTING COULD RESULT IN AN UNSAFE CONDITION HAZARDOUS TO LIFE AND 
PROPERTY. Selection of the proper settings for a particular application should be made by a 
competent professional, such as a Boiler/Burner technician licensed by a state or government 
agency, engineering personnel of the burner, boiler or furnace manufacturer (OEM) or in the 
performance of duties based on the information from the OEM. 

The equipment described in this manual is capable of causing property damage, severe injury, 
or death. It is the responsibility of the owner or user to ensure that the equipment described is 
installed, operated and commissioned in compliance with the requirements of all national and 
local codes. 

FIREYE

®

 

3 Manchester Road 
Derry, New Hampshire 03038 USA 

www.fireye.com

 

NXDTS-4410 

December 16, 2019 

Summary of Contents for NXD410TS









Reviews: