background image

 

 

 

 

                                                               www.panel.it                                                                1 

 

 

 

 

 

 

    

 

 

Panel PC PSG2-EM series  

Intel® N3350 / Intel® N4200

 

Capacitive touchscreen

 

 

 

  

 

 
 

User’s manual

 

Version 1.1 

 

 

 

All information contained in this manual, including all photographs, illustrations and software, is protected under international copyright laws, with all 
rights reserved. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written 
consent from Panel S.r.l. The information contained herein is believed to be accurate as of the date of publication; however, Panel S.r.l, makes no 
warranty, ex- pressed or implied, with regard to the products or documentation contained within this manual. Panel S.r.l. reserves the right to change 
the contents of this manual without notice. Panel shall not be liable for direct, indirect, special, incidental, or consequential damages arising out of the 
use  of  any  product,  nor  for  any  infringements  upon  the  rights  of  third  parties,  which  may  result  from  such  use.  Any  implied  warranties  of 
merchantability or fitness for any particular purpose is also disclaimed. Soft- ware names, hardware names and trademarks are registered by their 
respective companies. 

 

Summary of Contents for PSG2-EM Series


























Reviews: