Page | 2
1 - Introduction
This manual is written for the fire protection professional that designs, installs and maintains Firetrace Ltd Indirect
Low Pressure Integrated High-Throughput Bi-Directional system, this system must be designed, installed,
inspected, tested, maintained, and recharged by a competent and trained engineer.
Safety Precautions
The following safety precautions must always be followed
•
Read and understand this Manual and the other documents referenced herein.
•
The valve discharge ports must be sealed with the plugs provided at all times and only removed when the
system is connected into the discharge pipeline.
•
PPE suitable to the local environment shall be worn when installing a Firetrace® System. Wear safety
glasses when working with pressurised cylinders and charging equipment.
•
Make sure the Integrated Ball Valve (accessed by removing the top gauge of the cylinder valve) is in the
closed (horizontal) position, the safety caps have been installed, and the detection tubing has been
removed from the cylinder valve, before removing the cylinder from the installation and before
performing any servicing, leak tests or system changing.
•
Follow all the safety procedures included on the cylinder labels and within this manual.
•
Never assume that a cylinder is empty. Treat all cylinders as if they are fully charged.
Any questions concerning the information contained within this manual shall be addressed to:
Firetrace® Ltd
Unit 22-24 Knightsdale Road
Ipswich
Suffolk
IP1 4JJ
Email: [email protected]
Telephone: 01473 744090
Fax:
01473 744901
Summary of Contents for FTILPINTHTBI
