8. Use of one device as Master (without remote)
Set the module as Master:
1. On the module which you are
going to use as master: press
green button and keep it pressed
while power on until INIT
appears on screen.
2. To set the module as Master
press and hold blue button and
short press green button, release
both -> now module is Master in
POWER ON SLAVES state.
Connect all other modules to
Master:
1. Power on all other modules
you have (master can work
even without slaves).
2. Wait until all slaves are
shown on master screen
SLAVES:x
3. Press green button again ->
master enters TEST mode.
13
05/2018
Control the system:
In this mode you can control entire system (Master with all modules connected to it) via Master
using: Panel buttons, Other firing system via External trigger, External player or other controller via Time code, Computer
software via USB, Android application via USB or Bluetooth, Time with GPS Time.
