7. Use of one device as Standalone (without remote)
A. Firing automatic using panel buttons:
1. While module ARMED, press again
green button, module enters PLAY-
state and fires according the script.
2. If green button is pressed again,
module changes to PAUSE, and
continues again firing after green
button is pressed again.
3. If blue button is pressed, module
disarms and enters INIT state.
12
05/2018
C. Firing step by step using panel buttons:
1. While module ARMED, press blue button and
module goes in step by step mode or Seq by
Seq mode, if the scripts contains sequences.
2. In stept by step mode, if green button it is
pressed, next channel based on script order
will be fired. Channels programmed to be fired
in the same time, will be fired in the same
time. If blue button it is pressed next channel
will be skipped.
3. In Seq by Seq mode, if green button pressed
next sequence is fired.
D. Firing step by step using External trigger:
When an impulse is detected on external trigger,
next channel or sequence will be started.
B. Firing automatic using external trigger:
1. In ARMED state if the module detects an impulse on external
trigger the module goes in PLAY state.
2. In PLAY state, if the module detects a new impulse, it will pause
the script and resume it on the next impulse.
