Firepower TIG 160S Operating Manual Download Page 2

Page: 2 / 52

WE APPRECIATE YOUR BUSINESS!

Congratulations on receiving your new Firepower product. We are proud to have you as our customer

and will strive to provide you with the best service and support in the industry. This product is backed

by our extensive warranty and world-wide service network.

We know you take pride in your work and we feel privileged to provide you with this high performance

product that will help you get the job done.

YOU ARE IN GOOD COMPANY!

The Brand of Choice for Contractors and Fabricators Worldwide.

Firepower is a Global Brand of Arc Welding Products for Victor Technologies Inc. We distinguish

ourselves from our competition through market-leading innovation and truly dependable products

that will stand the test of time.

We strive to enhance your productivity, efficiency and welding performance enabling you to excel

in your craft. We design products with the welder in mind delivering- advanced features, durability,

ease of use and ergonomic comfort.

Above all, we are committed to a safer working environment within the welding industry. Your

satisfaction with this product and its safe operation is our ultimate concern. Please take the time to

read the entire manual, especially the Safety Precautions.

If you have any questions or concerns regarding your new Firepower product, please contact our

friendly and knowledgeable Customer Service Team at:

1-800-462-2782 (USA) and 1-905-827-4515 (Canada),

or visit us on the web at

www.firepoweronline.com

Summary of Contents for TIG 160S





















































Search results

Summary of Contents for TIG 160S

Reviews:

Related manuals for TIG 160S

Brands by name

Popular brands

Firepower TIG 160S, Operating Manual

Search results

Summary of Contents for TIG 160S

Reviews:

Related manuals for TIG 160S

Brands by name

Popular brands