4.
3.
Heating capacity
The heating capacity according to DIN 18893 standard is in m3, referring to
buildings that do not comply with the Heat Insulation Regulation. For buildings
complying with the mentioned regulation other values are valid (DIN 18893 -1).
Make inquires about further details at a specialized dealer or a responsible
chimney sweep.
4.
Installation guide
All national, regional and local laws, orders and regulations must be
taken into consideration.
This might mean that depending on the location, installation may have to be
done by an expert, a specialist company and additional fire fighting measures
need to be taken into consideration.
Regarding this matter, ask a responsible chimney sweep or other competent
expert before installing and operating the appliance. (You can also get help
from DIN 18896: 2005-06 standard that contains the technical rules of installa-
tion of solid fuel stoves and the requirements of their users' instructions.)
Examination of chimneys takes place according to DIN EN 13384 standard.
The necessary data for examination and the safety distances from combustible
and heat sensitive materials are contained in the attached technical data sheet.
