2
FGi.FPi.FXi
Issue
08 03/13
1. List of Components
Description of Parts
Qty
FXi/FPi Stove Assembly
1
Multi Tool
1
Ash Pan
1
Flue Spigot Collar
1
Spigot Collar fixing screws
3
Stove Operating Glove
1
2. Component Identification and Assembly
Your stove comes packed in a plywood crate. Carefully remove the straps and lift
off the upper crate. Remove any plastic packaging, open the door and remove all
the contents. See List of Components section and check contents carefully.
2.1 To remove the baffle plate, first remove the fuel retainer by lifting it up and out the
front of the stove. Remove the firebox base liners, the two side liners and the rear
liner. Handle & store very carefully to one side where they will not get broken.
2.2 Now the baffle plate can be removed by lifting off its supports and bringing out
through the firebox door opening.
2.3 It is sometimes useful to remove the door at this stage by opening and lifting up to
slide the hinge pins out.
2.4 Remove the 2 x screws securing the primary air control/grate shaker rod fascia plate
from under the firebox. Lift up the rear of the whole grate assembly and slide up and
out of the opening in the base of the firebox. Do not dislodge or remove the seal
fitted under it.
2.5 Now proceed to install the stove according to these instructions and current
installation standards or HETAS advice. The internal parts of the stove can be re-
assembled as the reverse of the previous removal instructions.
Fig 2
– FGi/FXi/FPi 5, FGi/FXi/FPi 5W, FGi/FXi/FPi 8 Stove Assembly and
controls
Fig 1 - Multi Tool Details
